Inspection On Vehicle
INSPECTION ON VEHICLE
PROCEDURE
1. CHECK STEERING EFFORT (TORQUE)
NOTICE:
These maintenance operations may affect the SRS airbags. Before performing any maintenance, carefully read the precautions for the SRS airbag system.
Click here
![]()
(a) Park the vehicle on a flat, paved surface and set the wheels straight ahead.
(b) Remove the horn button assembly.
Click here
![]()
(c) Connect the cable to the negative (-) battery terminal.
(d) Using a torque wrench, make sure the steering wheel adjusting nut is correctly tightened.
Torque:
50 N·m {510 kgf·cm, 37 ft·lbf}
(e) Start the engine so that the power steering is ready to operate.
(f) Turn the steering wheel 90 degrees to the right and check the steering effort (torque) with the wheel turned. Check in the opposite direction in the same way.
Standard steering effort (reference):
5.5 N*m (56 kgf*cm, 49 lbf*in) maximum
(g) Align the front wheels with the vehicle centerline.
(h) Turn the ignition switch OFF.
(i) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
When the cable has been disconnected, some systems must be reset after the cable is reconnected.
Click here
![]()
(j) Reinstall the horn button assembly.
Click here
![]()