Power Steering Assist Systems

Check / Clear DTCs

~2min read
1special tools

CHECK / CLEAR DTCs

CHECKING DTCs (USING TECHSTREAM)

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Chassis / EMPS / Trouble Codes.

Chassis > EMPS > Trouble Codes

(f) Check the details of the DTCs.

Click here

CHECKING DTCs (USING SST CHECK WIRE)

(a) Using the SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST: 09843-18040

*a

DLC3

(b) Turn the ignition switch to ON.

(c) Read and note the DTCs indicated by the EPS warning light flashing in the combination meter assembly. Refer to the illustration on the right for examples of the normal system code and DTCs 21 and 22.

*a

Normal system code

*b

Codes 21 and 22

*c

ON

*d

OFF

*e

seconds

*f

Code 21

*g

Code 22

HINT:

  • If the EPS warning light does not flash to display stored DTCs or the normal system code, check the circuit indicated in the following table.

    Suspected Area

    Link

    EPS warning light circuit

  • If two or more malfunction codes are present, the DTCs will be displayed in ascending numerical order.

(d) Refer to the Diagnostic Trouble Code Chart for DTC information.

Click here

(e) Check the details of the DTCs.

EPS DTC

EPS warning light display

Tester display

11

C1511

C1512

C1513

C1514

C1517

12

C1528

13

C1541

15

C1515

16

C1516

22

C1552

23

C1554

24

C1521

C1522

C1523

25

C1531

C1532

C1533

C1534

C1551

C1555

26

C1581

C1582

41

U0100

42

U0129

44

C1567

45 (with Toyota Safety Sense P)

U023A

CLEARING DTCs (USING TECHSTREAM)

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Chassis / EMPS / Trouble Codes.

Chassis > EMPS > Clear DTCs

(f) Clear DTCs.

Click here

(g) Turn the ignition switch to OFF.

(h) Disconnect the Techstream from the DLC3.