Radio Receiver and Speakers

* These models are equipped with an airbag, which may deploy (inflate) when connected to the battery. Disconnect the negative battery cable and wait at least two minutes before starting work on the airbag.

* If your vehicle's stereo has an anti-theft code system, make sure you know the radio activation code before disconnecting the battery.

RADIO RECEIVER

Removal and installation

PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the center trim panel (refer to Subsection 11.21).

3. Remove the mounting screws or bolts and pull the radio receiver out of the instrument panel.
4. Remove the screws or nuts, remove the radio receiver from the bracket, then disconnect the connector and antenna lead.
5. Installation is the reverse of removal.

SPEAKERS

Removal and installation

PROCEDURE
1. Remove the front door trim panel (refer to Subsection 11.12).

2. Remove the speaker mounting nuts/screws. Disconnect the connector and remove the speaker (speaker mounting screws on the front door are indicated by arrows).
3. Installation is the reverse of removal.

Antenna

Removal and installation

PROCEDURE
1. Remove the two Phillips-head screws.
2. Remove the antenna, pull out the lead, and disconnect it.
3. Installation is the reverse of removal.