Seat memory control unit (memory)

The driver's seat is additionally equipped with a small electronic control unit with memory for 4 different positions. The memory control buttons are located in the door armrest.

To switch on, press the "ON/OFF" button on the "ON" side. To switch off and lock any position 1-4, press the button on the "OFF" side. The stored data are not erased.

The memory unit does not replace the manual adjustment controls on the side of the seat base.

Storing a position in memory. Set the seat to the required position. Press the "Memory" key and, at the same time, one of the four buttons.

The selected seat position is stored under that button and will be set automatically each time it is pressed. Any subsequent programming to the same number automatically erases the previous data.

Seat adjustment using memory. Performed with the driver's door open or within 15 seconds after it is closed. Briefly press the button with the corresponding number; each corresponds to one of the stored positions, and the seat moves automatically to that position.

If more than the specified 15 seconds have passed since the door was closed, the procedure is the same, except the button with the selected number must be pressed and held until the stored driver's seat position is fully reached.