TURN SIGNAL AND HEADLIGHT SWITCH LEVERS

A High/low beam headlight switch. Position 0 – exterior lighting off. Position 1 – parking lights (sidelights). Position 2 – low beam and high beam.

Instrument illumination: When the exterior lights are on, the brightness of the instrument panel and center console illumination is adjusted in steps by turning the adjustment knob.

B Turn signal and headlight low beam switch. Turn signals operate only with the ignition switched on.

Right turn – lever up.

Left turn – lever down.

The turn signal indicator lamp flashes at the same time as the turn signal is activated.

After the turn is completed, the turn signals switch off automatically.

Lane change turn signal operation: To do this, lightly press the lever up or down and hold it briefly in that position. The indicator lamp should flash.

Switching low beam to parking lights and headlight flash

Parking lights – lever to the center position.

High beam – lever up.

Headlight flash – pull the lever toward the steering wheel.

Parking lights

Operate only with the key removed from the ignition lock. Right parking lights – lever up.

Left parking lights – lever down.

When switching exterior lights, strictly observe the requirements of traffic regulations.