HEAD RESTRAINTS

Head restraints must be adjusted to suit the occupant's height. Effective protection together with seat belts is possible only when the head restraints are correctly set to the proper height.

Adjusting the head restraints. Grasp them with both hands on each side and pull up to the required height, or press down in the reverse order.

The top edge of the head restraints should be at eye level.

Removal and installation of head restraints

Lift the protective cover upward, use a small screwdriver to remove the retaining springs from the slots as shown in the illustration, and pull out the head restraints.

When installing them, first insert the retaining springs into the slots of the protective cover with the loops facing outward, then insert the head restraint posts into the guide holes and press down until the lock clicks audibly. Lower the protective cover as far as possible.