Rest Stop Reminder Signal

Every 2 hours, the selected computer function automatically switches to the "Driving Time" data display. At the same time, the "2:00" indication starts flashing to remind the driver that 2 hours have passed and it is time to make a short rest stop.

The signal is canceled by pressing the function switch or the "reset" data reset button. If the ignition is not turned off or the vehicle does not resume moving within 10 minutes, this same signal will appear on the display every 2 hours, with the cumulative driving time, "4:00, 6:00", etc.

If the rest stop lasts more than 10 minutes and the ignition is turned off, the previous time count is automatically cleared and will not be added to the next reading.

Driving Time

Shows the driving time since the data was last reset in the memory. The information is not erased when the ignition is switched off. When driving resumes, the time count continues. The maximum reading is 23 hours 59 minutes.

If you need to start counting from a different time interval, clear the previous data by pressing the "reset" button.