Control box (mode 2)

POWER

Green: electrical connection established; charging can be carried out.

CHARGE

Flashing green: charging in progress or thermal preconditioning activated.

Steady green: charging complete.

FAULT

Red: fault; charging not authorised or must be stopped immediately. Check that connections are correct and that the electrical installation has no fault.

If the indicator does not go out, consult the CITROËN network or a qualified workshop.

When the charging cable is connected to the domestic socket, all indicators light up briefly.

If no indicator lights up, check the circuit breaker associated with the domestic socket:

- If the circuit breaker has tripped, contact a professional to check the compatibility of the electrical installation and/or repair it.

- If the circuit breaker has not tripped, stop using the charging cable and contact the CITROËN network or a qualified workshop.

Control box label - Recommendations

Refer to the user guide before use.

1. Incorrect use of this charging cable may cause fire, property damage, serious injury or death by electric shock!

2. Always use a properly earthed electrical socket protected by a 30 mA residual current device (RCD).

3. Always use an electrical socket protected by a circuit breaker suited to the amperage of the electrical circuit.

4. The electrical socket, plug and cables must not bear the weight of the control box.

5. Never use this charging cable if it is faulty or shows any damage.

6. Never attempt to repair or open this charging cable. No parts are repairable: replace the charging cable if it is faulty.

7. Never immerse this charging cable in water.

8. Never use this charging cable with an extension lead, multi-socket, conversion adapter or on a damaged electrical socket.

9. Do not unplug the wall plug to stop charging.

10. Immediately stop charging by locking then unlocking with the vehicle remote key if the charging cable or the wall plug becomes hot to the touch.

11. This charging cable contains parts that may produce electric arcs or sparks: do not expose it to flammable vapours.

12. Only use this charging cable with CITROËN vehicles.

13. Never plug in or unplug the wall plug with wet hands.

14. Do not force the connector if it is locked in the vehicle.

Control box label - Indicator light status

Manual reset procedure

The control box can be reset by unplugging the charging connector and the wall plug at the same time.

Then reconnect the wall plug first. For more information, refer to the owner's manual.