Hyundai Elantra CN7 Quiz

Adjusting 1st and Reverse Brake End Play

In this manual: Adjusting 1st and Reverse Brake End Play
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
Переверните коробку передач задней частью вверх и установите индикатор часового

Turn the transaxle over so the rear faces up and install a dial indicator. Move the special service tool up and down and measure the end play.

Specification: 1.35 – 1.81 mm

If the end play is not within specification, adjust it by selecting a new pressure plate with a thickness within the specified range.

Толщина нового нажимного диска = (измеренный зазор "А") + (толщина специального

Thickness of new pressure plate = (measured clearance "A") + (thickness of special service tool) − (specified end play) (Refer to the Snap Ring and Spacer Selection Chart).

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.