Hyundai Elantra CN7 Quiz

Drive Shaft Oil Seal Replacement

In this manual: Drive Shaft Oil Seal Replacement
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read

1. Disconnect the drive shaft from the transaxle (refer to CHAPTER DS - "Drive Shaft and Front Axle").

2. С помощью плоской отвертки извлеките сальник.

2. Using a flat-blade screwdriver, remove the oil seal.

3. Using the special tool (installer 0943121200), lightly tap in a new oil seal to the transmission case.

4. Нанесите масло для АКПП (ATF) на рабочую кромку сальника.

4. Apply ATF to the sealing lip of the oil seal.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.