Hyundai Elantra CN7 Quiz

Speedometer Cable Replacement

In this manual: Speedometer Cable Replacement
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
1. Правильно установите переходник в комбинацию приборов и привяжите к нему новый

1. Correctly install the adapter in the instrument cluster, and attach the new speedometer cable to it.

2. Установите резиновую втулку так, чтобы трос и выступающая часть втулки были

2. Install the rubber grommet so that the cable and the protruding part of the grommet are horizontal, as shown in the illustration.

3. Со стороны коробки передач необходимо вставить наконечник троса привода спидометра

3. On the transaxle side, insert the speedometer cable end into the transaxle and securely tighten the mounting nut.

Make sure the speedometer cable is connected correctly.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.