Automatic Light Control System
Specifications
Specifications
| Items | Specifications | |
| Rated Voltage | 5V | |
| Load | Max. 1 mA (relay load) | |
| Illumination (LUX) | 50 | 0.98 ± 0.2 V |
| 150 | 1.74 ± 0.38 V | |
Components and Component Location
Component Location

| 1. Automatic Light Sensor 2. Headlamps 3. Light Switch (Auto) |
4. Rear combination lamp 5. Integrated Body Control Unit (IBU) |
Circuit Diagrams
Wiring Diagram

Description and Operation
Description
This system uses a light sensor to automatically turn on the tail lamps and headlamps based on changes in the ambient light condition. It is activated when the vehicle enters or exits a tunnel, or when the ambient light condition changes due to rain, snow, or fog. Precautions for using this system are as follows.
Do not install any other device on top of this device.
Always switch to manual mode in poor visibility conditions, such as fog, heavy rain, or overcast weather.
Ambient light intensity in actual driving is not always constant, and the lamp on/off timing may vary greatly depending on the climate, season, and surrounding environment.
Use this system only during sunrise and sunset, and operate the lamp ON/OFF manually for general conditions.
A malfunction may occur if a light coating blocks the light, which may affect the internal lighting applied.
Test yourself
A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.