Kia Stinger CK Quiz
Body Electrical System

Horn

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
4steps
~24min
2/5difficulty
Done 0 of 4

Components and Component Location

Component Location

1. Horn Switch
2. Horn Relay (built into the metal core PCB)
3. Horn (Low Pitch)		 4. Horn (High-Pitched)
5. Clock Spring

Repair Procedures

Removal

  1. Remove the front bumper assembly.

    (Refer to Body - "Front Bumper Assembly")

  2. After loosening each horn mounting bolt of the low-pitched horn (A) and high-pitched horn (B), disconnect the connector (C) and remove the horn.

    [Low-Pitched Horn]

    [High-Pitched Horn]

Installation

  1. After connecting the horn connectors, install both the high-pitched and low-pitched horns.

  2. Install the front bumper assembly.

Inspection

  1. The horn relay of this vehicle is built into the metal core printed circuit board of the engine compartment relay box.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.