Body Electrical System
Sunroof
In this manual: Body Electrical System
~1min read
Components and Component Location
Component Location

| 1. Sunroof 2. Sunroof switch |
3. Sunshade motor and controller 4. Glass motor and controller |
Circuit Diagrams
Wiring Diagram

| No. | Sunroof Wiring Connector (Vehicle Side) |
Glass Motor (Driver) |
Sunshade Motor (Passenger) |
![]() |
![]() |
![]() |
|
| 1 | Ground 1 | Motor Relay Control Sensor (CCW) | Motor Relay Control Sensor (CCW) |
| 2 | Open Warning | Express open activation | Motor Relay Control Sensor (CW) |
| 3 | Express open activation | - | Hall Sensor 1 |
| 4 | Tilt Up Switch | - | Mass Air Flow Sensor |
| 5 | Open switch | Open switch | Hall Sensor 2 |
| 6 | Battery 1 | 2nd click of switch | Sensor Motor Power Supply |
| 7 | - | Close switch | |
| 8 | Vehicle Speed Signal | - | |
| 9 | 2nd click of switch | Sensor Motor Power Supply | |
| 10 | Close Switch | Motor Relay Control Sensor (CW) | |
| 11 | - | Battery | |
| 12 | - | Vehicle Speed Signal | |
| 13 | - | - | |
| 14 | - | LIN bus | |
| 15 | Configuration | ||
| 16 | Tilt Up Switch | ||
| 17 | Open Warning | ||
| 18 | Hall Sensor 1 | ||
| 19 | Hall Sensor 2 | ||
| 20 | Ground |
Test yourself
A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?


