Kia Stinger CK Quiz
Body Electrical System

Power Window Switch

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
29steps
~174min
5/5difficulty
Done 0 of 29

Components and Component Location

Components

Driver Power Window Switch

Auxiliary Window Regulator Switch

Rear Power Window Switch

Circuit Diagrams

Wiring Diagram

Driver Power Window Switch

[Front Security + IMS Type]

[Front Security + Non-IMS Type]

Auxiliary Window Regulator Switch

[Door Lock Type]

[Non-Door Lock Type]

Rear Power Window Switch

[Seat Heater Type]

[Non-Seat Heater Type]

Repair Procedures

Inspection

Diagnosis using KDS

  1. The body electrical system can be quickly diagnosed for faulty parts using the Kia Diagnostic System (KDS).

    The Diagnostic System (KDS) provides the following information.

    1. Self-Diagnosis: Checks and displays diagnostic trouble codes (DTC)

    2. Current Data: Checks the input/output status of the system.

    3. Actuation Test: Checks the operating condition of the system.

    4. Additional Functions: Other controls such as system option and zero point

  2. Select the "Vehicle Model" and the system to be checked in order to inspect the vehicle with the scan tool.

  3. Select "Driver Seat or Assist Door Module (DDM/ADM)" to check the driver seat or assist door module (DDM/ADM).

  4. Select the "Current Data" menu to view the current input/output data status.

    Input/output data for the sensors related to the driver seat or assist door module (DDM/ADM) can be checked.

  5. If you want to forcibly check the operation of the power door lock, select "Active Test".

Removal

Driver Power Window Switch

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front driver door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  3. Disconnect the power window switch connector (A).

  4. Remove the power window switch (A) after loosening the mounting screws.

Auxiliary Window Regulator Switch

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front door auxiliary trim panel.

    (Refer to Body - "Front Door Trim Panel")

  3. Disconnect the power window switch connector (A).

  4. Remove the power window switch (A) after loosening the mounting screws.

Rear Power Window Switch

  1. Disconnect the negative (-) battery terminal.

  2. Remove the rear door trim.

    (Refer to Body - "Rear Door Trim Panel")

  3. Disconnect the power window switch connector (A).

  4. Remove the power window switch (A) after loosening the mounting screws.

Installation

Driver Power Window Switch

  1. Install the power window switch.

  2. Connect the power window switch connector.

  3. Install the driver front door trim panel after connecting the connector.

  4. Connect the negative (-) battery terminal.

Auxiliary Window Regulator Switch

  1. Install the power window switch.

  2. Connect the power window switch connector.

  3. Install the front door auxiliary trim panel after connecting the connector.

  4. Connect the negative (-) battery terminal.

Rear Power Window Switch

  1. Install the power window switch.

  2. Connect the power window switch connector.

  3. Install the rear door trim after connecting the connector.

  4. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.