Voice Command (if equipped)

Activating Voice Command

• To activate Voice Command, briefly press thekey on the steering wheel.
• If Voice Command is in [Normal Mode], the system says "Say a command. Beep."

❈ If Voice Command is in [Expert Mode], the system only emits "Beep-."

❈ Voice Command setting [Normal Mode]/[Expert Mode]: Press theSelect [System] using the tuning knobor press theSelect [VRS Mode] using the tuning knobSet [Normal Mode] / [Expert Mode]

• Give the voice command.

NOTE For proper voice recognition, speak the voice command after the guidance message and the "beep" have sounded.

Skipping the guidance message

While the guidance message is playing, briefly press the(0.8 seconds maximum) to interrupt the guidance message and produce a "beep".

After the "beep", give the voice command.

Ending the voice command

• When using Voice Command, press and hold the(more than 0.8 seconds) to end the voice command.
• When using Voice Command, pressing the steering wheel control or another button will end the voice command.
• When the system is waiting for a voice command, say "cancel" or "End" to end the voice command.
• When the system is waiting for a voice command, briefly press the(0.8 seconds maximum) to end the voice command.

❈ Illustration of voice command use

• Activating Voice Command. Briefly press the(for up to 0.8 seconds):

• Skipping voice recognition Briefly press the(for up to 0.8 seconds):

• Ending the voice command. Briefly press the(for up to 0.8 seconds):

Voice Command List

• Common commands: These commands can be used in almost all operations. (Some commands may not be available in certain operations.)

• FM/AM radio commands: Commands available when using the FM or AM radio.

• CD commands: Commands available when using CD.

• MP3 CD / USB commands: Commands available when using MP3 CD / USB.

• iPod® commands: Commands available when using iPod®.

• My Music commands: Commands available when using My Music.

• Bluetooth® Wireless Technology Audio commands: Commands available when using Bluetooth® Wireless Technology audio streaming from a mobile phone.

DECLARATION OF CONFORMITY

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician.

Caution: Any changes or modifications to this device not expressly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter unless authorized by the FCC.