Changing LDA settings
In this manual: Changing LDA settings
~1min read
- The LDA system can be enabled/disabled through a customize setting.
- The settings of the LDA can be changed on the customize settings.
- Vehicles with a driver monitor camera: When the system determines that the driver is tired, the lane departure warning function will operate at the "Earlier" timing, regardless of the customized setting. Also, this setting will be kept until the power switch is turned off.
WARNING
■Situations in which the system may not operate properly
In the following situations, the system may not operate properly and the vehicle may depart from its lane. Do not overly rely on these functions. The driver is solely responsible for paying attention to their surroundings and operating the steering wheel as necessary to ensure safety.
- When the boundary between the asphalt and grass, soil, etc., or structures, such as a curb, guardrail, etc. is not clear or straight
- When the vehicle is struck by a crosswind or the turbulence of other nearby vehicles
- Situations in which the lane may not be detected
- Situations in which the sensors may not operate properly
- Situations in which some or all of the functions of the system cannot operate
- When it is necessary to disable the system
Displays and system operation
The operating state of the lane departure alert function and steering assist operation of the lane departure prevention function are indicated.

Was this page helpful?