Sensor detection display, object distance
■ Detection range of the sensors
Vehicles without Advanced Park

- Approximately 100 cm (3.3 ft.)
- Approximately 150 cm (4.9 ft.)
- Approximately 60 cm (2.0 ft.)
The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle.
The range of the sensors may change depending on the shape of the object, etc.,
■ Detection range of the sensors
Vehicles with Advanced Park

- Approximately 200 cm (6.6 ft.)
The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle.
The range of the sensors may change depending on the shape of the object, etc.,
■ The distance and buzzer
Vehicles without Advanced Park

*: Automatic buzzer mute function is enabled.
Vehicles with Advanced Park

*: Automatic buzzer mute function is enabled.
Toyota parking assist-sensor buzzer
A buzzer sounds when the sensors are operating.
- The buzzer beeps faster as the vehicle approaches a static object.
When the vehicle comes within the approximately 30 cm (1.0 ft.) of the object, the buzzer will sound continuously.
- When 2 or more sensors simultaneously detect a static object, the buzzer sounds for the nearest object.
- After a buzzer begins sounding, if the distance between the vehicle and the detected a static object does not become shorter, the buzzer will be muted automatically.
(automatic buzzer mute function)
■Adjusting the buzzer volume
The buzzer volume of the Toyota parking assist-sensor, RCTA, and RCD* can all be changed at once from the customize settings.
*: If equipped
■Muting a buzzer
When the temporary mute switch is displayed on the multimedia display, this switch can be pressed to temporarily mute the buzzer.
Select the switch to mute a buzzer of the Toyota parking assist-sensor, RCTA, and RCD all together.
Mute will be canceled automatically in the following situations:
- When the shift position is changed.
- When the vehicle speed exceeds a certain speed.
- When there is a malfunction in a sensor or the system is temporarily unavailable.
- When the operating function is disabled manually.
- When the power switch is turned off.