Taking out the emergency tire puncture repair kit

In this manual: Taking out the emergency tire puncture repair kit
Main Owner's Manual — 1Event data recorder — 1Exterior — 1Instrument panel (left-hand drive vehicles) — 1Switches (left-hand drive vehicles) — 1Interior (left-hand drive vehicles) — 1Instrument panel (right-hand drive vehicles) — 1Switches (right-hand drive vehicles) — 1Interior (right-hand drive vehicles) — 1For safe use — 1Before driving — 1For safe driving — 1Seat belts — 1Correct use of the seat belts — 1SRS airbags — 1Exhaust gas precautions — 1Child safety — 1Airbag manual on-off system — 1Riding with children — 1Child restraint systems — 1Child restraint system compatibility for each seating position — 1Child restraint system installation method — 1Child restraint system fixed with an ISOFIX lower anchorage — 1Emergency assistance — 1Hybrid system — 1Hybrid system features — 1Acoustic vehicle alerting system — 1Hybrid system precautions — 1Hybrid battery (traction battery) air intake vent — 1Theft deterrent system — 1Immobilizer system — 1Double locking system — 1Alarm — 1Warning lights and indicators — 1Warning lights — 1Indicators — 1Gauges and meters (7-inch display) — 1Meter display — 1Adjusting the clock — 1Gauges and meters (12.3-inch display) — 1Meter display — 1Adjusting the clock — 1Multi-information display(7-inch display) — 1Display contents — 1Changing the meter display — 1Driving support system information display — 1Settings display — 1Multi-information display(12.3-inch display) — 1Display contents — 1Changing the meter display — 1Fuel Economy — 1EV drive time ratio — 1Settings display — 1Head-up display — 1System components — 1Using the head-up display — 1Pop-up display — 1Energy monitor/consumption screen — 1Key information — 1Keys — 1Digital key — 1Opening, closing and lockingthe doors — 1Side doors — 1Unlocking and locking the doors from the inside — 1Back door — 1Unlocking and locking the back door from the outside — 1Opening/closing the back door (vehicles with power back door) — 1Changing settings of the power back door system (vehicles with power back door) — 1Smart entry & start system — 1Adjusting the seats — 1Front seats — 1Rear seats — 1Head restraints — 1Adjusting the steering wheeland mirrors — 1Steering wheel — 1Inside rear view mirror — 1Digital Rear-view Mirror — 1Adjusting the mirror — 1Cleaning the Digital Rear-view Mirror — 1Outside rear view mirrors — 1Opening and closing the windows — 1Favorite settings — 1Driving position memory — 1Registering/canceling/recalling a driving position to an electronic key (memory recall function) — 1My Settings — 1Before driving — 1Driving the vehicle — 1Cargo and luggage — 1Trailer towing — 1Driving procedures — 1Power (ignition) switch — 1EV drive mode — 1Transmission — 1Turn signal lever — 1Parking brake — 1Brake Hold — 1Operating the lights and wipers — 1Headlight switch — 1AHS (Adaptive High-beam System) — 1AHB (Automatic High Beam) — 1Fog light switch — 1Windshield wipers and washer — 1Refueling — 1Using the driving supportsystems — 1Toyota Safety Sense software update — 1Toyota Safety Sense — 1Sensors used by Toyota Safety Sense — 1Situations in which the sensors may not operate properly — 1Driver monitor — 1PCS (Pre-Collision System) — 1Operating conditions of each function of the pre-collision system — 1Situations in which the system may not operate properly — 1LTA (Lane Tracing Assist) — 1Enabling/disabling the system — 1LCA (Lane Change Assist) — 1Operating the LCA — 1LDA (Lane Departure Alert) — 1Changing LDA settings — 1PDA (Proactive driving assist) — 1FCTA (Front crossing traffic alert) — 1RSA (Road Sign Assist) — 1Types of road signs supported — 1Dynamic radar cruise control — 1Using the dynamic radar cruise control — 1Approach warning — 1Cruise control — 1Speed limiter — 1Emergency Driving Stop System — 1BSM (Blind Spot Monitor) — 1Blind Spot Monitor operation — 1Automatic Rear Flashing Hazard Lights — 1Secondary Collision Brake (Rear Impacts while Stopped) — 1Safe Exit Assist — 1Safe exit assist operation — 1Toyota parking assist-sensor — 1Sensor detection display, object distance — 1Toyota parking assist-sensor object warning function (vehicles with Advanced Park) — 1RCTA (Rear Crossing Traffic Alert) function — 1RCTA function — 1RCD (Rear Camera Detection) — 1When a pedestrian is detected — 1PKSB (Parking Support Brake) — 1System overview — 1Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) — 1Types of sensors — 1Parking Support Brake function (moving vehicles rear of the vehicle) — 1Parking Support Brake function (pedestrians rear of the vehicle) — 1Toyota Teammate Advanced Park — 1Types of cameras and sensors used for the Advanced Park — 1Advanced Park guidance screens — 1Perpendicular parking (forward/reverse) function — 1Advanced Park perpendicular exiting (forward/reverse) function — 1Advanced Park Parallel parking function — 1Advanced Park parallel exiting function — 1Advanced Park memory function — 1Remote control function (if equipped) — 1Advanced Park cancelation/ suspension — 1Changing the Advanced Park settings — 1Driving mode select switch — 1GPF (Gasoline Particulate Filter) system — 1Driving assist systems — 1Driving tips — 1Hybrid electric vehicle driving tips — 1Winter driving tips — 1Selecting tire chains — 1Using the air conditioningsystem and defogger — 1Automatic air conditioning system — 1Air outlet layout and operations — 1Heated steering wheel/seat heaters — 1Using the interior lights — 1Using the storage features — 1List of storage features — 1Luggage compartment features — 1Other interior features — 1Power outlet — 1USB Type-C charging port — 1Wireless charger — 1Sun visors — 1Cleaning and protecting the vehicle exterior — 1Cleaning and protecting the vehicle interior — 1Maintenance requirements — 1Do-it-yourself service precautions — 1Hood — 1Positioning a floor jack — 1Engine compartment — 1Components — 1Checking the engine oil — 1Adding engine oil — 1Checking the coolant — 112-volt battery (2ZR-FXE engine) — 112-volt battery (M20A-FXS engine) — 1Tires — 1Checking tires — 1Tire rotation — 1Installing tire pressure warning valves and transmitters — 1Registering ID codes — 1Selecting wheel set — 1Tire inflation pressure — 1Wheels — 1Air conditioning filter — 1Cleaning the hybrid battery (traction battery) air intake vent — 1Electronic key battery — 1Checking and replacing fuses — 1Light bulbs — 1Essential information — 1Emergency flashers — 1If your vehicle has to be stopped in an emergency — 1If the vehicle is submerged or water on the road is rising — 1Steps to take in an emergency — 1If your vehicle needs to be towed — 1Emergency towing procedure — 1If you think something is wrong — 1If a warning light turns on or a warning buzzer sounds — 1If a warning message is displayed — 1If you have a flat tire (vehicles with an emergency tire puncture repair kit) — 1Location of the emergency tire puncture repair kit and tools — 1Taking out the emergency tire puncture repair kit — 1If you have a flat tire (vehicles with a spare tire) — 1Installing the spare tire — 1If the hybrid system will not start — 1If the electronic key does not operate properly — 1If the 12-volt battery is discharged — 1If your vehicle overheats — 1If the vehicle becomes stuck — 1Specifications — 1Maintenance data (fuel, oil level, etc.) — 1Fuel information — 1Customization — 1
6steps
~36min
2/5difficulty
Done 0 of 6

1. Open the deck board.

2. Take out the emergency tire puncture repair kit.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

Emergency repair method

1. Attach the sticker provided with the tire puncture repair kit to a position easily seen from the driver's seat.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

2. Remove the valve cap from the valve of the punctured tire.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

3. Remove the cap from the nozzle.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

4. Connect the nozzle to the valve.

Screw the end of the nozzle clockwise as far as possible. The bottle should hang vertically without contacting the ground. If the bottle does not hang vertically, move the vehicle so that the tire valve is located properly.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

5. Remove the cap from the bottle.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

6. Pull the hose out from the compressor.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

7. Connect the bottle to the compressor.

Screw the end of the hose clockwise as far as possible.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

8. Make sure that the compressor switch is (off).

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

9. Remove the power plug from the compressor.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

10. Connect the power plug to the power outlet socket.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

11. Check the specified tire inflation pressure.

Tire inflation pressure is specified on the label on the driver's side door frame as shown.

Left-hand drive vehicles

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

Right-hand drive vehicles

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

12. Start the hybrid system.

13. To inject the sealant and inflate the tire, turn the compressor switch to (on).

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

14. Inflate the tire until the specified air pressure is reached.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)
  1. The sealant will be injected and the pressure will surge and then gradually decrease.
  2. The air pressure gauge will display the actual tire inflation pressure about 1 minute (5 minutes at low temperature) after the switch is turned (on).
  3. Inflate the tire to the specified air pressure.
  • If the tire inflation pressure is still lower than the specified point after inflation for 35 minutes with the switch at (on), the tire is too damaged to be repaired.

    Turn the compressor switch to (off) and contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.

  • If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pressure.

15. Turn the compressor switch to (off)

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

16. Disconnect the nozzle from the valve on the tire and then pull out the power plug from the power outlet socket.

Some sealant may leak when the nozzle is removed.

17. Press the button to release pressure from the bottle.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

18. Attach the cap to the nozzle.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

19. Install the valve cap onto the valve of the emergency repaired tire.

20. Disconnect the hose from the bottle and attach the cap to the bottle.

Place the bottle in the original bag and zip it.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

21. Temporarily store the bottle and compressor in the luggage compartment.

22. To spread the liquid sealant evenly within the tire, immediately drive safely for about 5 km (3 miles) below 80 km/h.

23. After driving for about 5 km (3 miles), stop your vehicle in a safe place on a hard, flat surface and connect the compressor.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

24. Check the tire inflation pressure.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)
  1. If the tire inflation pressure is under 130 kPa (1.3 kgf/cm2 or bar, 19 psi): The puncture cannot be repaired. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
  2. If the tire inflation pressure is 130 kPa (1.3 kgf/cm2 or bar, 19 psi) or higher, but less than the specified air pressure: Proceed to step 25.
  3. If the tire inflation pressure is the specified air pressure: Proceed to step 26.

25. Turn the compressor switch to (on) to inflate the tire until the specified air pressure is reached. Drive for about 5 km (3 miles) and then perform step 24.

26. Store the bottle in the luggage compartment while it is connected to the compressor.

27. Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h to the nearest any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for tire repair or replacement.

28. For repair and replacement of a tire or disposal of the tire puncture repair kit, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.

When having the tire repaired or replaced, make sure to tell any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer that the sealant is injected.

■If the tire is inflated to more than the specified air pressure

1. Press the button to let some air out.

Toyota C-HR. If you have a flat tire (vehicles with an emergency tire puncture repair kit)

2. Check that the air pressure indicator shows the specified air pressure. If the air pressure is under the designated pressure, turn the compressor switch (on) again and repeat the inflation procedure until the specified air pressure is reached.

■The valve of a tire that has been repaired

After a tire is repaired with the emergency tire puncture repair kit, the valve should be replaced.

■After a tire is repaired with the emergency tire puncture repair kit

  • The tire pressure warning valve and transmitter should be replaced.
  • Even if the tire inflation pressure is at the recommended level, the tire pressure warning light may come on/flash.

WARNING

■Do not drive the vehicle with a flat tire

Do not continue driving with a flat tire.

Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.

Driving with a flat tire may cause a circumferential groove on the side wall.

In such a case, the tire may explode when using a repair kit.

■When fixing the flat tire

  • Stop your vehicle in a safe and flat area.
  • Do not touch the wheels or the area around the brakes immediately after the vehicle has been driven.

    After the vehicle has been driven, the wheels and the area around the brakes may be extremely hot.

    Touching these areas with hands, feet or other body parts may result in burns.

  • Connect the valve and hose securely with the tire installed on the vehicle. If the hose is not properly connected to the valve, air leakage may occur as sealant may be sprayed out.
  • If the hose comes off the valve while inflating the tire, there is a risk that the hose will move abruptly due to air pressure.
  • After inflation of the tire has completed, the sealant may splatter when the hose is disconnected or some air is let out of the tire.
  • Follow the operation procedure to repair the tire. If the procedures not followed, the sealant may spray out.
  • Keep back from the tire while it is being repaired, as there is a chance of it bursting while the repair operation is being performed. If you notice any cracks or deformation of the tire, turn (off) the compressor switch and stop the repair operation immediately.
  • The repair kit may overheat if operated for a long period of time. Do not operate the repair kit continuously for more than 40 minutes.
  • Parts of the repair kit become hot during operation. Be careful when handling the repair kit during and after operation. Do not touch the metal part around the connecting area between the bottle and compressor.

    It will be extremely hot.

  • Do not attach the vehicle speed warning sticker to an area other than the one indicated. If the sticker is attached to an area where an SRS airbag is located, such as the pad of the steering wheel, it may prevent the SRS airbag from operating properly.
  • To avoid risk of burst or severe leakage, do not drop or damage the bottle. Visually inspect the bottle before use. Do not use a bottle with shock, crack, scratch, leakage or any other damage. In such case, immediately replace.

■Driving to spread the liquid sealant evenly

Observe the following precautions to reduce the risk of accidents.

Failing to do so may result in a loss of vehicle control and cause death or serious injury.

  • Drive the vehicle carefully at a low speed. Be especially careful when turning and cornering.
  • If the vehicle does not drive straight or you feel a pull through the steering wheel, stop the vehicle and check the following.
    • Tire condition. The tire may have separated from the wheel.
    • Tire inflation pressure. If the tire inflation pressure is 130 kPa (1.3 kgf/cm2 or bar, 19 psi) or less, the tire may be severely damaged.

NOTICE

■When performing an emergency repair

  • A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a sharp object such as nail or screw passing through the tire tread.

    Do not remove the sharp object from the tire. Removing the object may widen the opening and disenable emergency repair with the repair kit.

  • The repair kit is not waterproof.

    Make sure that the repair kit is not exposed to water, such as when it is being used in the rain.

  • Do not put the repair kit directly onto dusty ground such as sand at the side of the road. If the repair kit vacuums up dust etc., a malfunction may occur.
  • Do not turn the bottle upside down when using it, as doing so may cause damage to the compressor.

■Precautions for the emergency tire puncture repair kit

  • The repair kit power source should be 12 V DC suitable for vehicle use.

    Do not connect the repair kit to any other source.

  • If fuel splatters on the repair kit, the repair kit may deteriorate. Take care not to allow fuel to contact it.
  • Place the repair kit in a storage to prevent it from being exposed to dirt or water.
  • Store the repair kit in the luggage compartment out of reach of children.
  • Do not disassemble or modify the repair kit. Do not subject parts such as the air pressure indicator to impacts. This may cause a malfunction.

■To avoid damage to the tire pressure warning valves and transmitters

When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or other qualified service shop as soon as possible. After use of liquid sealant, make sure to replace the tire pressure warning valve and transmitter when repairing or replacing the tire.