Operating the LCA
In this manual: Operating the LCA
2steps
~12min
1/5difficulty
Done 0 of 2
If the turn signal lever is held in the first position, the lane change direction will be displayed and the function will operate.
To change lanes by holding the turn signal lever in the first position without using the LCA, turn the customize setting of the LCA off.

- First position: LCA is operational
- Second position: LCA is not operational
WARNING
■Situations in which the LCA should not be used
- When driving on a one lane road
- When there is no broken white line between the current lane and the lane to be changed to
Enabling/disabling the system
LCA can be enabled/disabled through a customize setting.
Displays and system operation
The operating state of the LCA system is indicated.

Was this page helpful?