RCTA function

In this manual: RCTA function
Main Owner's Manual — 1Event data recorder — 1Exterior — 1Instrument panel (left-hand drive vehicles) — 1Switches (left-hand drive vehicles) — 1Interior (left-hand drive vehicles) — 1Instrument panel (right-hand drive vehicles) — 1Switches (right-hand drive vehicles) — 1Interior (right-hand drive vehicles) — 1For safe use — 1Before driving — 1For safe driving — 1Seat belts — 1Correct use of the seat belts — 1SRS airbags — 1Exhaust gas precautions — 1Child safety — 1Airbag manual on-off system — 1Riding with children — 1Child restraint systems — 1Child restraint system compatibility for each seating position — 1Child restraint system installation method — 1Child restraint system fixed with an ISOFIX lower anchorage — 1Emergency assistance — 1Hybrid system — 1Hybrid system features — 1Acoustic vehicle alerting system — 1Hybrid system precautions — 1Hybrid battery (traction battery) air intake vent — 1Theft deterrent system — 1Immobilizer system — 1Double locking system — 1Alarm — 1Warning lights and indicators — 1Warning lights — 1Indicators — 1Gauges and meters (7-inch display) — 1Meter display — 1Adjusting the clock — 1Gauges and meters (12.3-inch display) — 1Meter display — 1Adjusting the clock — 1Multi-information display(7-inch display) — 1Display contents — 1Changing the meter display — 1Driving support system information display — 1Settings display — 1Multi-information display(12.3-inch display) — 1Display contents — 1Changing the meter display — 1Fuel Economy — 1EV drive time ratio — 1Settings display — 1Head-up display — 1System components — 1Using the head-up display — 1Pop-up display — 1Energy monitor/consumption screen — 1Key information — 1Keys — 1Digital key — 1Opening, closing and lockingthe doors — 1Side doors — 1Unlocking and locking the doors from the inside — 1Back door — 1Unlocking and locking the back door from the outside — 1Opening/closing the back door (vehicles with power back door) — 1Changing settings of the power back door system (vehicles with power back door) — 1Smart entry & start system — 1Adjusting the seats — 1Front seats — 1Rear seats — 1Head restraints — 1Adjusting the steering wheeland mirrors — 1Steering wheel — 1Inside rear view mirror — 1Digital Rear-view Mirror — 1Adjusting the mirror — 1Cleaning the Digital Rear-view Mirror — 1Outside rear view mirrors — 1Opening and closing the windows — 1Favorite settings — 1Driving position memory — 1Registering/canceling/recalling a driving position to an electronic key (memory recall function) — 1My Settings — 1Before driving — 1Driving the vehicle — 1Cargo and luggage — 1Trailer towing — 1Driving procedures — 1Power (ignition) switch — 1EV drive mode — 1Transmission — 1Turn signal lever — 1Parking brake — 1Brake Hold — 1Operating the lights and wipers — 1Headlight switch — 1AHS (Adaptive High-beam System) — 1AHB (Automatic High Beam) — 1Fog light switch — 1Windshield wipers and washer — 1Refueling — 1Using the driving supportsystems — 1Toyota Safety Sense software update — 1Toyota Safety Sense — 1Sensors used by Toyota Safety Sense — 1Situations in which the sensors may not operate properly — 1Driver monitor — 1PCS (Pre-Collision System) — 1Operating conditions of each function of the pre-collision system — 1Situations in which the system may not operate properly — 1LTA (Lane Tracing Assist) — 1Enabling/disabling the system — 1LCA (Lane Change Assist) — 1Operating the LCA — 1LDA (Lane Departure Alert) — 1Changing LDA settings — 1PDA (Proactive driving assist) — 1FCTA (Front crossing traffic alert) — 1RSA (Road Sign Assist) — 1Types of road signs supported — 1Dynamic radar cruise control — 1Using the dynamic radar cruise control — 1Approach warning — 1Cruise control — 1Speed limiter — 1Emergency Driving Stop System — 1BSM (Blind Spot Monitor) — 1Blind Spot Monitor operation — 1Automatic Rear Flashing Hazard Lights — 1Secondary Collision Brake (Rear Impacts while Stopped) — 1Safe Exit Assist — 1Safe exit assist operation — 1Toyota parking assist-sensor — 1Sensor detection display, object distance — 1Toyota parking assist-sensor object warning function (vehicles with Advanced Park) — 1RCTA (Rear Crossing Traffic Alert) function — 1RCTA function — 1RCD (Rear Camera Detection) — 1When a pedestrian is detected — 1PKSB (Parking Support Brake) — 1System overview — 1Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) — 1Types of sensors — 1Parking Support Brake function (moving vehicles rear of the vehicle) — 1Parking Support Brake function (pedestrians rear of the vehicle) — 1Toyota Teammate Advanced Park — 1Types of cameras and sensors used for the Advanced Park — 1Advanced Park guidance screens — 1Perpendicular parking (forward/reverse) function — 1Advanced Park perpendicular exiting (forward/reverse) function — 1Advanced Park Parallel parking function — 1Advanced Park parallel exiting function — 1Advanced Park memory function — 1Remote control function (if equipped) — 1Advanced Park cancelation/ suspension — 1Changing the Advanced Park settings — 1Driving mode select switch — 1GPF (Gasoline Particulate Filter) system — 1Driving assist systems — 1Driving tips — 1Hybrid electric vehicle driving tips — 1Winter driving tips — 1Selecting tire chains — 1Using the air conditioningsystem and defogger — 1Automatic air conditioning system — 1Air outlet layout and operations — 1Heated steering wheel/seat heaters — 1Using the interior lights — 1Using the storage features — 1List of storage features — 1Luggage compartment features — 1Other interior features — 1Power outlet — 1USB Type-C charging port — 1Wireless charger — 1Sun visors — 1Cleaning and protecting the vehicle exterior — 1Cleaning and protecting the vehicle interior — 1Maintenance requirements — 1Do-it-yourself service precautions — 1Hood — 1Positioning a floor jack — 1Engine compartment — 1Components — 1Checking the engine oil — 1Adding engine oil — 1Checking the coolant — 112-volt battery (2ZR-FXE engine) — 112-volt battery (M20A-FXS engine) — 1Tires — 1Checking tires — 1Tire rotation — 1Installing tire pressure warning valves and transmitters — 1Registering ID codes — 1Selecting wheel set — 1Tire inflation pressure — 1Wheels — 1Air conditioning filter — 1Cleaning the hybrid battery (traction battery) air intake vent — 1Electronic key battery — 1Checking and replacing fuses — 1Light bulbs — 1Essential information — 1Emergency flashers — 1If your vehicle has to be stopped in an emergency — 1If the vehicle is submerged or water on the road is rising — 1Steps to take in an emergency — 1If your vehicle needs to be towed — 1Emergency towing procedure — 1If you think something is wrong — 1If a warning light turns on or a warning buzzer sounds — 1If a warning message is displayed — 1If you have a flat tire (vehicles with an emergency tire puncture repair kit) — 1Location of the emergency tire puncture repair kit and tools — 1Taking out the emergency tire puncture repair kit — 1If you have a flat tire (vehicles with a spare tire) — 1Installing the spare tire — 1If the hybrid system will not start — 1If the electronic key does not operate properly — 1If the 12-volt battery is discharged — 1If your vehicle overheats — 1If the vehicle becomes stuck — 1Specifications — 1Maintenance data (fuel, oil level, etc.) — 1Fuel information — 1Customization — 1
2steps
~12min
1/5difficulty
Done 0 of 2

■ Operation of the RCTA function

The RCTA function uses rear side radar sensors to detect vehicles approaching from the right or left at the rear of the vehicle and alerts the driver of the presence of such vehicles by flashing the outside rear view mirror indicators and sounding a buzzer.

Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  1. Approaching vehicles
  2. Detection areas of approaching vehicles

■ RCTA icon display

When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the multimedia display.

  • Example (Panoramic view monitor): Vehicles are approaching from both sides of the vehicle
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function

■ RCTA function detection areas

The areas that vehicles can be detected in are outlined below.

Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function

The buzzer can alert the driver of faster vehicles approaching from farther away.

Example:

Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function

■The RCTA function is operational when

The RCTA function operates when all of the following conditions are met:

  • The power switch is in ON.
  • The RCTA function is on.
  • The shift position is in R.
  • The vehicle speed is less than approximately 15 km/h.
  • The approaching vehicle speed is between approximately 8 km/h and 56 km/h.

■Setting the buzzer volume

The buzzer volume of the RCTA, Toyota parking assist-sensor, and RCD* can be adjusted all together through a customize setting.

*: If equipped

■Muting a buzzer temporarily

When an object is detected, the temporary mute switch is displayed on the multimedia display.

Select the switch to mute the buzzer of the Toyota parking assist-sensor, RCTA, and RCD* all together.

Mute will be canceled automatically in the following situations:

  • When the shift position is changed.
  • When the vehicle speed exceeds a certain speed.
  • When there is a malfunction in a sensor or the system is temporarily unavailable.
  • When the operating function is disabled manually.
  • When the power switch is turned off.

*: If equipped

■Conditions under which the system will not detect a vehicle

The RCTA function is not designed to detect the following types of vehicles and/or objects:

  • Vehicles approaching from directly behind
  • Vehicles backing up in a parking space next to your vehicle
  • Vehicles that the sensors cannot detect due to obstructions
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • Guardrails, walls, signs, parked vehicles and similar stationary objects*
  • Small motorcycles, bicycles, pedestrians, etc.*
  • Vehicles moving away from your vehicle
  • Vehicles approaching from the parking spaces next to your vehicle*
  • The distance between the sensor and approaching vehicle gets too close

*: Depending on the conditions, detection of a vehicle and/or object may occur.

■Situations in which the system may not operate properly

The RCTA function may not detect vehicles correctly in the following situations:

  • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area
  • When mud, snow, ice, a sticker, etc., is covering the sensor or surrounding area on the position above the rear bumper
  • When driving on a road surface that is wet with standing water during bad weather, such as heavy rain, snow, or fog
  • When multiple vehicles are approaching with only a small gap between each vehicle
  • When a vehicle is approaching at high speed
  • When equipment that may obstruct a sensor is installed, such as a towing eyelet, bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
  • When backing up on a slope with a sharp change in grade
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When backing out of a sharp angle parking spot
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • Immediately after the RCTA function is turned on
  • Immediately after the hybrid system is started with the RCTA function on
  • When the sensors cannot detect a vehicle due to obstructions
  • When towing with the vehicle
  • When there is a significant difference in height between your vehicle and the vehicle that enters the detection area
  • When a sensor or the area around a sensor is extremely hot or cold
  • If the suspension has been modified or tires of a size other than specified are installed
  • If the front of the vehicle is raised or lowered due to the carried load
  • When turning while backing up
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When a vehicle turns into the detection area
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function

■Situations in which the system may operate even if there is no possibility of a collision

Instances of the RCTA function unnecessary detecting a vehicle and/or object may increase in the following situations:

  • When the parking space faces a street and vehicles are being driven on the street
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When the distance between your vehicle and metal objects, such as a guardrail, wall, sign, or parked vehicle, which may reflect electrical waves toward the rear of the vehicle, is short
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When equipment that may obstruct a sensor is installed, such as a towing eyelet, bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
  • When a vehicle passes by the side of your vehicle
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When a detected vehicle turns while approaching the vehicle
Toyota C-HR. RCTA (Rear Crossing Traffic Alert) function
  • When there are spinning objects near your vehicle such as the fan of an air conditioning unit
  • When water is splashed or sprayed toward the rear bumper, such as from a sprinkler
  • Moving objects (flags, exhaust fumes, large rain droplets or snowflakes, rain water on the road surface, etc.)
  • When the distance between your vehicle and a guardrail, wall, etc., that enters the detection area is short
  • Gratings and gutters
  • When a sensor or the area around a sensor is extremely hot or cold
  • If the suspension has been modified or tires of a size other than specified are installed
  • If the front of the vehicle is raised or lowered due to the carried load
  • When towing with the vehicle.