Network Operation
Check / Clear DTCs
In this manual: Network Operation
~1min read
CHECK / CLEAR DTCs
CHECK WHETHER DTCs ARE OUTPUT
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Central Gateway / Trouble Codes.
Body Electrical > Central Gateway > Trouble Codes(e) Read the DTCs.
CLEAR DTCs
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Central Gateway / Trouble Codes.
Body Electrical > Central Gateway > Trouble Codes(e) Clear the DTCs.
Body Electrical > Central Gateway > Clear DTCsWas this page helpful?