Toyota Corolla Quiz
Suspension and Steering

Trailing Arm

In this manual: Suspension and Steering
Owner's Manual — 7Controls and Instruments — 49Engine Starting and Vehicle Operation — 5Actions if the Engine Does Not Start — 18Maintenance — 30Gasoline Engines - Repair Procedures Without Engine Removal from Vehicle — 17Gasoline Engines - Removal and Overhaul — 21Diesel Engine — 26Engine Electrical Equipment — 13Cooling and Heating Systems — 17Fuel and Exhaust Systems — 14Emission Control System — 19Manual transmission — 6Automatic transmission — 9Clutch and Axle Shafts — 11Brake System — 20Suspension and Steering — 24Body — 29Electrical System — 24Wiring Diagrams — 24
~1min read

Removal

PROCEDURE
1. Loosen the wheel nuts, raise the vehicle and support it on stands. Remove the wheel.

2. Открутите и снимите болт крепления (указаны стрелками) продольной тяги к кронштейну

2. Remove the mounting bolt (indicated by arrows) of the trailing arm from the knuckle bracket.

3. Открутите и снимите болт крепления (указаны стрелками) продольной тяги к кронштейну

3. Remove the mounting bolt (indicated by arrows) of the trailing arm from the body bracket and remove the trailing arm from the vehicle.

Installation

PROCEDURE
Installation is the reverse of removal. Do not tighten the bolts until the suspension has been raised with a jack to the position it occupies when the vehicle is standing on its wheels. Tighten the nuts to the torque specified in the Specifications section at the beginning of this chapter. Tighten the wheel nuts to the torque specified in the Specifications section of the relevant chapter.

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.