Detachable towing bracket* - Fitting/removing

Fitting and removing the detachable towing bracket on the Volvo S80 (2nd generation, 2013–2016) takes only a few steps. This section explains the individual steps, locking with the key and attaching the safety cable. Important warnings and care instructions are also given to ensure correct function. Tips on safe storage after removal round off the information.

The detachable towing bracket is fitted or removed as follows:

Fitting

1. Remove the protective cap. To do so, first press in the lockand then pull the cap straight back.

2. Check that the mechanism is in the unlocked position. To do so, turn the key clockwise.

3. The indicator window must be red.

4. Insert the towing bracket and push it in until a click is heard.

5. The indicator window must be green.

6. Turn the key counterclockwise to the locked position. Remove the key from the lock.

7. Make sure the towing bracket is secure: move it up, down and back.

If the trailer hitch does not sit correctly, it must be removed and reinstalled as described above.

Grease only the ball of the trailer hitch. The rest of the ball area must remain clean and dry.

8. Safety cable.

Be sure to attach the trailer's safety cable to the holder provided for it.

Removing the trailer hitch

1. Insert the key and turn it clockwise to unlock the lock.

2. Press in the locking knoband turn it counterclockwise until a click is heard.

3. Turn the locking knob fully to the stop, press it down, and at the same time pull the trailer hitch out toward the rear and upward.

Secure a trailer hitch stored in the vehicle, see Removable trailer hitch* - Storage

4. Slide the protective cap on until it snaps into place.

Related information

- Detachable towing bracket* - Storage

- Detachable towing bracket* - Technical data

- Towing a trailer

Installing and removing the removable trailer hitch on the Volvo S80 (2nd gen) is simple and safe. Correct engagement and the green indicator window confirm proper attachment. Attaching the safety cable to the designated holder is mandatory.

When removing the hitch, also proceed carefully: fit the protective cap and stow the hitch securely. This keeps the system functional and the vehicle interior clean.

FAQ

Why is the green indicator window important?
It shows that the trailer hitch is correctly installed and locked.

What to observe when greasing the ball?
Grease only the ball. The rest must remain clean and dry so that function is not impaired.