Alcohol lock* - symbols and text messages. Starting the engine. Stopping the engine. Steering lock

Symbols and messages of the alcohol lock in the Volvo S80 (2nd generation, 2013–2016) give the driver clear feedback on the status of the function. This section shows the possible displays before and during the starting procedure. In addition, information is provided on switching the engine on and off safely and on the function of the steering lock. Recommendations for use with Keyless Drive improve comfort and safety.

Alcohol interlock* - symbols and text messages

In addition to the messages already described regarding the function of the alcohol lock before starting the engine, the instrument cluster display may also show the following:

A A Volvo authorised workshop is recommended.

Related information

- Alcohol interlock*

- Alcohol interlock* - functions and operation

- Alcohol interlock* - storage

- Alcohol lock* - before starting the engine

- Alcohol interlock* - notes

Starting the engine

The engine is started and stopped with the transponder key and the START/STOP ENGINE button.

Ignition lock with transponder key pulled out/pushed in and START/STOP ENGINE button.

Do not insert the transponder key upside down. Hold the key by the end with the removable key blade, see Removable key blade - removing/attaching

1. 1
   Insert the transponder key into the ignition lock and push it all the way in. Note that in vehicles with an alcohol lock*, a breath test must first be passed before the engine can be started.

   For more information on the alcohol lock function, see Alcohol lock*

2. 2
   Press the clutch pedal fully down2.

   (In vehicles with automatic transmission: press the brake pedal.)

3. 3
   Press the START/STOP ENGINE button and then release it.

In vehicles with a diesel engine, there may be a short delay before the engine starts. During this time, Engine preheating is shown in the display.

When starting the engine, the starter motor runs until the engine starts or the overheating protection stops it.

2 If the vehicle is rolling, pressing the START/STOP ENGINE button is sufficient to start the engine.

If the engine does not start after 3 attempts, wait 3 minutes before the next attempt. Starting performance improves when the battery is allowed to recover.

Never remove the transponder key from the ignition lock after starting the engine or when towing the vehicle.

Always remove the transponder key from the ignition lock when leaving the vehicle. Make sure the key is in position 0, especially if children are in the vehicle.

For information on the procedure, see Key positions

On some engine types, the idle speed may be noticeably higher than normal during a cold start. This brings the emission control system up to normal operating temperature as quickly as possible, which reduces exhaust emissions and protects the environment.

Keyless Drive*

To start the engine without the key, follow steps 2-3.

To start the engine, one of the remote keys with Keyless Drive* function must be inside the passenger compartment or the luggage compartment.

Never remove the transponder key from the vehicle while driving or towing.

Related information

- Switching off the engine

Turning off the engine

The engine is switched off with the START/STOP ENGINE button.

To switch off the engine:

• Press START/STOP ENGINE - the engine switches off.

If the selector lever is not in position P, or if the vehicle is rolling:

• Press START/STOP ENGINE twice, or press and hold the button until the engine stops.

Related information

- Key positions

Steering lock

The steering lock makes it harder to steer the vehicle, for example after theft.

A mechanical noise can be heard when the steering lock unlocks or locks.

Function

• The steering lock is activated when the driver's door is opened after the engine has been switched off.
• The steering wheel lock is deactivated when the transponder key is in the ignition lock3 and the START/STOP ENGINE button is pressed.

Related information

- Starting the engine

- Key positions

- Steering wheel

The alcohol interlock and starting system of the Volvo S80 (2nd gen) are designed for ease of use and safety. Clearly recognizable symbols and text messages in the instrument cluster help the driver start and switch off the engine.

The steering lock provides additional protection and locks automatically after the engine is switched off. This keeps the vehicle secured even when the driver is absent.

Volvo combines comfort and safety in one well-designed system.