Hyundai Elantra CN7 Quiz

Inspection Procedures by DTC - DTC P0710

In this manual: Inspection Procedures by DTC - DTC P0710
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
DTC P0710: Transaxle Fluid Temperature Sensor and Its Circuit Possible Cause
If the transaxle fluid temperature sensor output voltage is 2.6 V or higher 10 minutes after the vehicle starts moving (i.e., ATF temperature does not increase), it is considered that an open circuit has occurred in the transaxle fluid temperature sensor circuit and DTC P0710 is stored in the ECU memory.

If the transaxle fluid temperature sensor signal corresponds to 200°C or higher for 1 second or longer, it is considered that an open circuit has occurred in the transaxle fluid temperature sensor circuit and DTC P0710 is stored in the ECU memory.

 Faulty transaxle fluid temperature sensor / Faulty (poor contact) connector / Faulty TCM
Процедуры проверки по диагностическим кодам неисправностей - Код Р0725

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.