Hyundai Elantra CN7 Quiz

Diagnostic Trouble Code Troubleshooting Procedures - DTCs P0750, P0755, P0760, P0765

In this manual: Diagnostic Trouble Code Troubleshooting Procedures - DTCs P0750, P0755, P0760, P0765
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
DTC P0750: 1st and Reverse Brake Solenoid Valve and Circuit DTC P0755: Underdrive Clutch Solenoid Valve and Circuit DTC P0760: 2nd Brake Solenoid Valve and Circuit DTC P0765: Overdrive Clutch Solenoid Valve and Circuit Possible Cause
If the solenoid valve coil resistance is outside the specified range (too high or too low), a short or open circuit in the solenoid valve circuit is likely to have occurred, and the corresponding DTC is stored in the ECU memory. The transaxle enters fail-safe mode (shift control disabled) and is fixed in 3rd gear. Solenoid valve malfunction Poor contact in connector Automatic transaxle control module (ECU) malfunction
Процедуры проверки по диагностическим кодам неисправностей - Коды Р0743, Р0740

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.