Hyundai Elantra CN7 Quiz

Diagnostic Trouble Code Troubleshooting Procedures - DTC P0732

In this manual: Diagnostic Trouble Code Troubleshooting Procedures - DTC P0732
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
DTC P0732: Calculated 2nd Gear Ratio Does Not Match Specified Value Possible Cause
If the output shaft speed sensor [PG-B] signal value, multiplied by the 2nd gear ratio, does not match the input shaft speed sensor [PG-A] signal value after 2nd gear is engaged, DTC P0732 is stored in the TCM memory. If this DTC occurs 4 times in succession, the transmission enters fail-safe mode (shift control is inhibited) and is fixed in 3rd gear. Malfunction of the transaxle input shaft speed sensor. Malfunction of the transaxle output shaft speed sensor. Malfunction of the underdrive clutch drum. Malfunction of the drive or driven gear of the idler gear. Malfunction of the 2nd gear brake. Malfunction of the underdrive clutch. Abnormal noise occurs.
Процедуры проверки по диагностическим кодам неисправностей - Код Р0733

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.