Troubleshooting by Symptom Table
In this manual: Troubleshooting by Symptom Table
~1min read
| Symptom | Inspection Procedure No. | |
| Cannot communicate with tester | 1 | |
| Vehicle cannot be driven | Engine cannot be started (engine crankshaft does not rotate with starter) | 2 |
| Vehicle Does Not Move Forward | 3 | |
| Vehicle Does Not Move in Reverse | 4 | |
| Vehicle Does Not Move Either Forward or in Reverse | 5 | |
| Malfunctions when starting vehicle from standstill | Engine Stalls When A/T Selector Lever Is Shifted Into a Drive Position | 6 |
| Shock (Jolt) and Large Delay When Shifting A/T Selector Lever From "N" to "D" | 7 | |
| After shifting the A/T selector lever from "N" to "R", shock (jolt) is felt and there is a long delay before the gear engages | 8 | |
| Shock (Jolt) and Engagement Delay When Shifting A/T Selector Lever From "N" to "R" and From "N" to "D" | 9 | |
| Malfunctions during gear shifting | Strong shocks (jolts) are felt and gear shifting is abrupt | 10 |
| Shift points are offset (early or late engagement of the next gear) | Shift points are off for all gears. | 11 |
| Shift points are off for some gears. | 12 | |
| No gear shifting occurs | In all ranges (gears) | 13 |
| Malfunctions while driving | Poor acceleration in some gears | 14 |
| Shudder (vibration) is felt. | 15 | |
| Poor acceleration in all gears | 16 | |
Test yourself
A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?