Hyundai Elantra CN7 Quiz

Inspection Procedures by DTC - DTC P0715

In this manual: Inspection Procedures by DTC - DTC P0715
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
DTC P0715: Transaxle Input Shaft Speed Sensor (Pulse Generator A) and Its Circuit Possible Cause
If no transaxle input shaft speed sensor output pulses are detected for 1 second or longer in 3rd or 4th gear while driving at 30 km/h or higher, it is considered that a short circuit or open circuit has occurred in the sensor circuit and DTC P0715 is stored in the TCM memory. If this DTC occurs 4 times, the transaxle enters fail-safe mode (shift control is inhibited) and is fixed in 3rd or 2nd gear. Input shaft speed sensor malfunction Underdrive clutch drum malfunction Poor contact in connector Automatic transaxle control module (ECU) malfunction
Процедуры проверки по диагностическим кодам неисправностей - Код Р0720

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.