Kia Stinger CK Quiz
Body Electrical System

Around View Monitor (AVM) Switch

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
10steps
~60min
3/5difficulty
Done 0 of 10

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the console upper assembly (A) using a remover.

  3. Disconnect the connectors (A) from the console upper assembly.

  4. Fully disconnect the connector (A) from the console floor switch.

  5. Fully remove the console floor switch (A) after loosening the mounting screws.

Installation

  1. Installation of the console floor switch is complete.

  2. Connect the connector to the console floor switch assembly.

  3. Connect the connectors to the console upper assembly.

  4. Install the console upper.

  5. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.