Kia Stinger CK Quiz
Body Electrical System

Panoramic Camera

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
32steps
~192min
5/5difficulty
Done 0 of 32

Components and Component Location

Components

Front View Camera

Side View Camera

Rearview Camera

Repair Procedures

Removal

Front View Camera

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front bumper assembly.

    (Refer to Body - "Front Bumper Assembly")

  3. Disconnect the front view camera connector (A).

  4. Remove the front view camera (A) after loosening the mounting screws.

Side View Camera

  1. Disconnect the negative (-) battery terminal.

  2. Remove the outside rearview mirror.

    (Refer to Body - "Outside Rear View Mirror")

  3. Remove the mirror (A) in the direction shown in the illustration, using a (-) screwdriver.

  4. Disconnect the heater connector (B) and the BCW indicator connector (A) from the mirror.

  5. Remove the outside rearview mirror housing (A) after loosening the mounting screws.

  6. Remove the outside rearview mirror rear cover (A).

  7. Disconnect the side view camera connectors (A).

  8. Remove the side view camera (A) after loosening the mounting screw.

Rearview Camera

  1. Disconnect the negative (-) battery terminal.

  2. Remove the rear back panel of the tailgate.

    (Refer to Body - "Rear Door Trim Panel")

  3. Disconnect the license plate lamp connectors (A).

  4. Remove the tailgate outside handle assembly (A) after loosening the mounting screws.

  5. Remove the rear view camera (A) after loosening the mounting screws.

Installation

Front View Camera

  1. Install the front view camera after connecting the connector.

  2. Install the front bumper assembly.

  3. Connect the negative (-) battery terminal.

Side View Camera

  1. Install the side view camera after connecting the connector.

  2. Install the outside rearview mirror rear cover.

  3. Install the outside rearview mirror housing.

  4. Connect the heater connectors and the BCW indicator connector.

  5. Install the mirror.

  6. Install the outside rearview mirror.

  7. Connect the negative (-) battery terminal.

Rearview Camera

  1. Install the rear view camera.

  2. Install the rear door outside handle assembly.

  3. Connect the license plate lamp connectors.

  4. Install the rear panel of the rear door.

  5. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.