Body Electrical System

Fuel Filler Door Open Sensor

10steps
~60min
3/5difficulty
Done 0 of 10

Components and Component Location

Components

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the airbag lower panel.

    (Refer to Body - "Under Cover Panel")

  3. Remove the [LH] trim (A) after loosening the mounting screw.

  4. After loosening the mounting screws, remove the side mirror switch (A).

  5. Disconnect the side cover switch connector (A).

Installation

  1. Connect the side mirror switch connector.

  2. Install the side mirror switch.

  3. Install the trim panel [LH].

  4. Install the emergency pad lower panel.

  5. Connect the negative (-) battery terminal.

Inspection

  1. Check for continuity between the terminals. If there is an abnormality, replace the switch.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.