Kia Stinger CK Quiz
Body Electrical System

Parking Distance Warning (PDW) Sensor

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
16steps
~96min
4/5difficulty
Done 0 of 16

Components and Component Location

Components

Repair Procedures

Removal

Parking Distance Warning-Forward (PDW-F) Sensor

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front bumper assembly.

    (Refer to Body - "Front Bumper Assembly")

  3. Remove the front bumper absorber (A).

  4. Disconnect the connector (A) from the PDW-F sensor.

    [Type]

    [Type B]

  5. After opening the sensor holder (B), pull out the PDW-F sensor (A).

    [Type]

    [Type B]

Parking Distance Warning-Reverse (PDW-R) Sensor

  1. Disconnect the negative (-) battery terminal.

  2. Remove the rear bumper beam assembly.

    (Refer to Body - "Rear Bumper Beam Assembly")

  3. Disconnect the connector (A) from the PDW-R sensor.

    [Type]

    [Type B]

  4. After opening the sensor holder (B), pull out the PDW-R sensor (A).

    [Type]

    [Type B]

Installation

Parking Distance Warning-Forward (PDW-F) Sensor

  1. Install the PDW-F sensor after connecting the connector.

  2. Install the front bumper shock absorber.

  3. Install the front bumper assembly.

  4. Connect the negative (-) battery terminal.

Parking Distance Warning-Reverse (PDW-R) Sensor

  1. Install the PDW-R sensor after connecting the connector.

  2. Install the rear bumper beam assembly.

  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.