Body Exterior, Doors, Roof & Vehicle Security
Meter Buzzer Circuit
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
The buzzer for the warning chime system is installed in the combination meter.
The combination meter sounds the buzzer based on the signals transmitted from various units.
CHECK OPERATION OF METER BUZZER
CONSULT
Select “LIGHT WARN ALM” or “SEAT BELT WARN TEST” of “Active Test” mode of “BCM(BUZZER)”.
Does meter buzzer activate?
YES>>Inspection End.
NO>>Refer to Diagnosis Procedure.
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Select “BUZZER” in “Data Monitor” mode of “METER/M&A”.
| BUZZER | Status |
| Under the condition of buzzer input | On |
| Except above | Off |
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace BCM. Refer to Removal and Installation.
Was this page helpful?