Body Exterior, Doors, Roof & Vehicle Security

U1000 Can Comm Circuit

6steps
~36min
2/5difficulty
Done 0 of 6
DTC Description

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Murano vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Murano vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.

CAN Communication Signal Chart. Refer to CAN Communication Signal Chart.

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detecting condition
U1000–01

CAN COMM CIRCUIT

(CAN communication circuit)
Diagnosis condition All times
Signal (terminal) CAN communication
Threshold When automatic back door control module cannot communicate CAN communication signal
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

CAN communication system

FAIL-SAFE

Inhibit automatic back door system all function

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch OFF.

  2. Ignition switch ON and wait for 2 seconds or more.

  3. Select “Self Diagnostic Result” mode of “AUTO BACK DOOR”.

Is DTC “U1000-01” displayed?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

PERFORM SELF DIAGNOSTIC

CONSULT

  1. Ignition switch OFF.

  2. Ignition switch ON and wait for 2 seconds or more.

  3. Select “Self Diagnostic Result” mode of “AUTO BACK DOOR”.

Is DTC “U1000-01” displayed?

YES>>

Refer to Trouble Diagnosis Flow Chart.

NO>>

Refer to Intermittent Incident.