Body Exterior, Doors, Roof & Vehicle Security
U1010 Control Unit(can)
In this manual: Body Exterior, Doors, Roof & Vehicle Security
3steps
~18min
2/5difficulty
Done 0 of 3
DTC DETECTION LOGIC
| DTC No. | CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| U1010–49 | CONTROL UNIT(CAN) [Control unit (CAN)] |
Diagnosis condition | All times |
| Signal (terminal) | – | ||
| Threshold | Automatic back door control module detected internal CAN communication circuit malfunction | ||
| Diagnosis delay time | 2 seconds or more | ||
POSSIBLE CAUSE
Automatic back door control module
FAIL-SAFE
Inhibit automatic back door system all function
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch OFF.
Ignition switch ON and wait for 2 seconds or more.
Select “Self Diagnostic Result” mode of “AUTO BACK DOOR”.
Is DTC “U1010-49” displayed?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
When DTC “U1010-49” is detected, replace automatic back door control module.
>>Replace automatic back door control module. Refer to Removal and Installation.
Was this page helpful?