Theft Deterrent / Keyless Entry

System Diagram

~2min read

SYSTEM DIAGRAM

  • Following is a detailed diagram of the certification ECU (smart key system ECU assembly).
  • Following is a detailed diagram of the main body ECU (multiplex network body ECU).

Component

Function

Front Door Outside Handle Assembly

Receives request signals from the certification ECU (smart key system ECU assembly) via the built-in electronic key antenna (front door) and generates the vehicle exterior detection area.

Uses the built-in touch sensor (lock/unlock sensor) to detect operation of the front door outside handle assembly and sends signals to the certification ECU (smart key system ECU assembly).

No. 1 Interior Electronic Key Antenna Assembly (Front Floor)

No. 3 Interior Electronic Key Antenna Assembly (Luggage Compartment Interior)

Receives the request code from the certification ECU (smart key system ECU assembly) and generates a detection area inside the vehicle.

Electronic Key Antenna (Outside Luggage Compartment)

Receives the request code from the certification ECU (smart key system ECU assembly) and generates the detection area outside the back door.

Back Door Opener Switch Assembly

Sends switch operation signals to the certification ECU (smart key system ECU assembly).

Electronic Key and TPMS Receiver Assembly

Receives the smart key system ID code/remote code sent from the electronic key transmitter sub-assembly and transmits it to the certification ECU (smart key system ECU assembly).

Remote Door Lock Buzzer

Sounds when the warning functions respond to commands from the certification ECU (smart key system ECU assembly).

Electronic Key Transmitter Sub-assembly

Sends the ID code upon receiving a request signal.

Certification ECU (Smart Key ECU Assy)

Transmits request codes to each electronic key antenna.

Distinguishes and verifies the ID code of the smart key transmitter sub-assembly and transmits signals to each ECU according to the functions used (controls the entire system).

Establishes encryption code communication with the immobilizer code ECU when ignition operations are performed.