Windscreen wiper system
Adjusting the washer nozzles
In this manual: Windscreen wiper system
~1min read

The spray direction of the nozzles can be corrected with a needle if necessary. With the vehicle stationary, the spray jet should hit the upper edge of the wiped area.
On the rear window, the spray nozzle on the wiper shaft can be adjusted with a screwdriver.

On the rear window, the spray nozzle - a - can also be adjusted with a needle.
If the nozzle cap is to be removed, press the locking tabs outward in the direction of the arrow and remove the cap.
When installing, slide the cap with the locking tabs over the retaining pins, press down on the opposite side and make sure it locks.
Test yourself
A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?