Kia Stinger CK Quiz
Body Electrical System

Blind-Spot Collision Warning (BCW) Unit

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
4steps
~24min
2/5difficulty
0102030405013.710N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Components

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the rear bumper assembly.

    (Refer to Body - "Rear Bumper Assembly")

  3. Disconnect the BCW unit connector (A).

  4. Remove the BCW unit (A) after loosening the mounting nuts.

    Tightening torque: 8.8–13.7 N·m

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.