Body Electrical System

Overhead Console Lamp

6steps
~36min
2/5difficulty
Done 0 of 6

Repair Procedures

Inspection

  1. Remove the map lamp assembly, then check continuity between the terminals. If continuity is not as specified, replace the map lamp switch.

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the two mounting screws.

    Then remove the overhead console lamp (A).

  3. Remove the overhead console lamp by disconnecting the connectors (A).

Installation

  1. Connect the overhead console lamp connector.

  2. Install the overhead console lamp.

  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.