Body Electrical System

Rear Combination Lamp

20steps
~120min
4/5difficulty
Done 0 of 20

Repair Procedures

Removal

Rear Combination Lamp (Outside)

  1. Disconnect the negative (-) battery terminal.

  2. Using a screwdriver or a removal tool, remove the rear combination lamp cover (A).

  3. Remove the rear combination lamp (A) after loosening the mounting screw and nut.

  4. Disconnect the rear combination lamp connector (A).

Bulb Replacement

Turn Signal Indicator

  1. Turn off the headlamp switch.

  2. Remove the rear combination lamp (Outside).

  3. Remove the turn signal lamp (B) by turning the socket (A) counterclockwise.

Rear Combination Lamp (Inside)

  1. Disconnect the negative (-) battery terminal.

  2. Using a screwdriver or a removal tool, remove the rear combination lamp cover (A).

  3. Disconnect the connector (B) and remove the rear combination lamp (A) after loosening the nuts.

Bulb Replacement

Back-up Lamp

  1. Remove the rear combination lamp. (Inside)

  2. Remove the back-up lamp bulb (B) by turning the socket (A) counterclockwise.

Installation

Rear Combination Lamp (Outside)

  1. Connect the rear combination lamp connector.

  2. Install the rear combination lamp.

  3. Install the rear combination lamp cover.

  4. Connect the negative (-) battery terminal.

Rear Combination Lamp (Inside)

  1. Install the rear combination lamp.

  2. Connect the rear combination lamp connector.

  3. Install the rear combination lamp cover.

  4. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.