Combination headlight and dimmer switch

GENERAL INFORMATION

Switching between high beam and low beam

Low beam and high beam

Right and left turn signals

To turn on the lights, rotate the knob at the end of the lever.

First position: only the parking lights, tail lights, license plate lights and instrument panel lights are on.

Second position: the headlights are also on.

To turn on the high beam, push the lever forward. To turn on the low beam, move the lever back. To flash the headlights, pull the lever further back.

The indicator lamp in the instrument panel shows that the high beam is on. The headlight flasher can be used even if the headlight switch is off.

To operate the turn signal, move the turn signal lever up or down.

After a turn is completed, the turn signal automatically returns to its neutral position. However, when changing lanes, the turn signal switch must be returned to its original position manually. To signal a lane change, move the turn signal lever only slightly in the desired direction and hold it there with your hand.

If the green indicator lamp in the instrument panel flashes faster than usual, a front or rear turn signal bulb has burned out. If the indicator lamp does not illuminate at all, the fuse or the indicator lamp itself has likely failed.