IG power supply circuit
DESCRIPTION
The power supply voltage supplies the air conditioning amplifier assembly when the ignition switch is ON. This power supply is used to operate the air conditioning amplifier assembly, servo motors, etc.
WIRING DIAGRAM
PRECAUTION / NOTICE / HINT
NOTICE:
Check the fuses for the circuits related to this system before performing the following procedure.
PROCEDURE
CHECK WIRE HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - IG POWER SOURCE)
(a) Disconnect the connector from the air conditioning amplifier assembly. |
|
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
Tester Connection | Ignition switch position | Specified Condition |
|---|---|---|
F139-2 (IG+) - Body ground |
Ignition Switch in OFF position |
Below 1 V |
F139-2 (IG+) - Body ground |
Ignition Switch in ON position |
11 à 14 V |
| NG | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
CHECK WIRE HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - BODY GROUND)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
F139-4 (GND) - Body ground |
Always |
Below 1 Ω |
| OK | GO TO APPLICABLE SYSTEM AS INDICATED IN THE PROBLEM SYMPTOMS TABLE |
| NG | REPAIR OR REPLACE HARNESS OR CONNECTOR |
