Heater / Air Conditioning

Customizable Parameters

~3min read

CUSTOMIZABLE PARAMETERS

CUSTOMIZE AIR CONDITIONING SYSTEM

(a) Customization Using the Techstream.

NOTICE:

  • When the customer requests a change to a function, first make sure that the function can be customized.
  • Be sure to record the initial settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to its default value.

HINT:

The following items can be customized:

(1) Connect the Techstream.

(2) Turn the ignition switch ON.

(3) Turn on the Techstream.

(4) Select the following menus: Customize Setting / Air Conditioner.

(5) Select the setting by referring to the table below.

Air Conditioner

Tester display

Description

Default setting

Setting

ECU

Set Temperature Shift

This function controls the set temperature relative to the displayed temperature.

Normal

00001: -2C, 00010: -1C, 00100: Normal, 01000: +1C, 10000: +2C

Air Conditioning Amplifier Assembly

Evaporator Control

Set the evaporator control to Automatic (AUTO) to save energy, or to the coldest position (MANUAL) to dehumidify the air and prevent the windows from fogging.

Automatic

0: Automatic, 1: Manual

Air Conditioning Amplifier Assembly

Foot/DEF Auto Mode

Function that automatically sets the airflow to foot/defrost when AUTO mode is activated.

ON

0: ON position, 1: OFF position

Air Conditioning Amplifier Assembly

Foot/DEF Automatic Blow Up Function

Function that automatically increases the blower level when the defroster is activated.

ON

0: ON position, 1: OFF position

Air Conditioning Amplifier Assembly

ECO MODE Cancel

Function that disables ECO mode when set to ON.

ON

0 : OFF, 1 : ON

Air Conditioning Amplifier Assembly

Refrigerant Shortage Check

Function that cancels the refrigerant shortage check (check performed under normal operating conditions) when set to ON.

ON

0: ON position, 1: OFF position

Air Conditioning Amplifier Assembly

Fan Speed Increment Control

Function that adjusts the speed to reach the target blower fan speed when AUTO mode is activated.

Normal

001: Slow, 010: Normal, 100: Fast

Air Conditioning Amplifier Assembly

Outside Air Mode Auto Switch Function

Function that automatically switches the air intake to FRESH mode when the ignition switch has been OFF for 60 seconds.

ON

0: ON position, 1: OFF position

Air Conditioning Amplifier Assembly

(b) Customization Using the Multi-Information Display.

(1) Turn the ignition switch to ON.

(2) Select the following menus: SETUP / Vehicle / Vehicle Customization / Climate Settings.

(3) Select the setting by referring to the table below.

Temperature Setting

Display

Default setting

Content

Setting

Applicable ECU

A/C Auto Mode

ON

Function that automatically activates the A/C when the AUTO button is pressed while the blower is on and the A/C is off.

ON or OFF

Air Conditioning Amplifier