Theft Deterrent / Keyless Entry

System Description

~3min read

SYSTEM DESCRIPTION

IMMOBILISER SYSTEM DESCRIPTION

The Immobiliser System is designed to prevent vehicle theft. This system uses the Transponder Key ECU Assembly, which stores the ID codes of authorized ignition keys. If an attempt is made to start the engine with an unauthorized key, the Transponder Key ECU Assembly sends a signal to the ECM that cuts off fuel supply and ignition, making the engine unable to run.

FUNCTION OF MAIN COMPONENTS

Component

General Description

Transponder Key ECU Assembly

  • When a key is inserted into the ignition key cylinder, the Transponder Key ECU Assembly checks whether the key ID code sent from the Transponder Key Coil matches the registered key ID code.
  • When the engine is started, the Transponder Key ECU Assembly checks whether the engine ID codes registered in the ECM and the Transponder Key ECU Assembly match.

Transponder Key Coil

When a key is inserted into the ignition key cylinder, the Transponder Key Amplifier receives the ID code from the transponder chip in the key head and transmits it to the Transponder Key ECU Assembly.

ECM

The ECM receives the key ID code verification results from the Transponder Key ECU Assembly. The ECM also verifies the ECUs. Based on these results, the ECM decides whether to inhibit engine operation.

Unlock Warning Switch Assembly

The Unlock Warning Switch Assembly detects whether the key is in the ignition key cylinder and sends the result to the Transponder Key ECU Assembly.

SYSTEM OPERATION

(a) When the Transponder Key ECU Assembly detects that the Unlock Warning Switch Assembly is ON, the Transponder Key ECU Assembly supplies current to the Transponder Key Coil, which generates a magnetic field around the antenna coil. The transponder chip in the key head transmits a key ID code signal using the electromotive force generated by the magnetic field. The Transponder Key Coil receives the signal and sends it to the Transponder Key ECU Assembly. The Transponder Key ECU Assembly checks whether the key ID code sent from the Transponder Key Coil matches the registered key ID code.

When the engine is started, the ECM communicates with the Transponder Key ECU Assembly and checks the key verification result. In addition, the ECM checks whether the engine ID codes registered in the Transponder Key ECU Assembly and the ECM match. If they do not match, the ECM inhibits engine starting.