Theft Deterrent / Keyless Entry
Diagnostic System
In this manual: Theft Deterrent / Keyless Entry
~1min read
DIAGNOSTIC SYSTEM
DESCRIPTION
(a) The transponder key ECU assembly controls the immobiliser system. Immobiliser system data and diagnostic trouble codes (DTCs) can be read from the vehicle's data link connector 3 (DLC3).
CHECK DLC3
(a) Check DLC3.
Click here![]()
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery.
Was this page helpful?