Audi 80 Quiz
Brake System

Removing Rear Disc Brake Caliper

In this manual: Brake System
Technical Description — 39Engines — 41Exhaust System — 13Cooling System — 28Fuel tank and fuel pump — 12Air Filter and Intake Ducts — 13Mono-Motronic Injection System — 18Digifant Injection System — 19KE-III-Jetronic Injection System — 35MPI and MPFI Injection Systems — 32Clutch — 11Transmission and Driveline — 21Suspension and Steering — 33Brake System — 41Anti-lock brake system — 8Wheels and Tires — 13Body Electrical System — 35Ignition System — 24Lighting — 14Signaling Devices — 7Instruments and Auxiliary Equipment — 54Heating and Ventilation — 7Body Components — 18Troubleshooting — 6Specifications — 13
~1min read

PROCEDURE

Disconnect the brake hose if the brake caliper needs to be replaced.

Remove the caliper housing as for pad replacement. Pay attention to the note above!
Remove the parking brake cables.

Remove both caliper mounting bolts located on the axle.

When installing, tighten the caliper mounting bolts to 65 N·m.

Perform the adjustment again.

Test yourself

A quick Audi 80 quiz: every answer comes with an explanation and a link to the manual page.