Audi A3 Quiz
Body Electrical Equipment

Headlight Beam Range Adjustment Motor Removal and Installation

In this manual: Body Electrical Equipment
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Remove the headlight.

2. Left headlight: Release the motor by turning it to the left.

3. Right headlight: Release the motor by turning it to the right.

4. Remove the motor. Pull firmly to remove the ball pin from the reflector support. INSTALLATION

PROCEDURE

1. Holding the reflector through the opening in the low beam housing, insert the ball pin into the reflector support.

2. Lock the motor in the working position by turning it. The direction of rotation is opposite to removal.

3. Install the headlight.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.