Audi A3 Quiz
Body Electrical Equipment

Rear Lamp Removal and Installation

In this manual: Body Electrical Equipment
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Remove the bulb holder –1–. Refer to Exterior Light Bulb Replacement.

2. Unscrew the 4 mounting nuts (arrows).

3. Squeeze the latch –4– and remove the rear light outward. INSTALLATION

PROCEDURE

1. Visually inspect the rear light seal for damage.

2. Insert the rear light and secure it. Tighten the nuts lightly to 4 N•m.

3. Install the bulb holder. Refer to Exterior Light Bulb Replacement.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.